To: DW® CustomersDate: February 4, 2015Re: VMAX IP Plus™ Firmware Update v220.127.116.11
announces the release of new firmware for VMAX IP Plus™ NVRs. The firmware is available for download on our website and from our FTP server at the link below.
Release Notes for version 18.104.22.168:
- Updated internal code for stability
- New DW VMAX IP Plus Mobile Application–
Full functionality: live, playback and Pathfinder™ support via QR code scan*.
Available for both Android and iOS devices.
* NOTE: When using the QR code
scan/Pathfinder™ connection, the app will access the NVR through UDP protocol.
UDP does not guaranty network stability. This may cause a delay of stream or
packet drop issue, depending on customer's network environment. When such network
issues occur, it is recommended to connect the mobile client to the NVR through
the NVR’s IP address (port-forwarding will be necessary).
**NOTE: when using the 5MP special
firmware, the NVR’s supported channels is reduced.
- VMAX IP Plus 9-Channel
NVR (4-Channels PoE Plus 5 Bonus Channels): when using the 5MP firmware, the NVR will
support total 4-Channels, regardless of the camera’s resolution.
- VMAX IP Plus
16-Channel NVR (8-Channels PoE Plus 8 Bonus Channels): when using the 5MP firmware, the NVR
will support total 9-Channels, regardless of the camera’s resolution.
- VMAX IP Plus
16-Channel PoE NVR: when
using the 5MP firmware, the NVR will support total 9-Channels, regardless of
the camera’s resolution.
Password: dw1234For More Information:
Toll Free: 866.446.3595