Complete Surveillance Solutions
Sales Portal
  • DOWNLOAD HIGH-RES PHOTO
Share this Product!
STAR-LIGHT™ 39X Pan, Tilt, Zoom Camera
Model: DWC-PTZ39XFM

Find a Reseller Request a Demo ContactUs

Our STAR-LIGHT™ Series offers super low light imaging for any application. Along with Smart Digital Noise Reduction, our Star-Light™ technology offers a slow shutter feature that increases the length of time the shutter remains open to collect additional ambient light illuminating typically dark environments.

DISCONTINUED   

  • 1/4" EX-View HAD PS CCD Sensor
  • 39x Optical Zoom, 32x Digital Zoom with Auto Focus
  • Wide Dynamic Range (WDR)
  • STAR-LIGHT™ Super Low Light Technology
  • 3.4 ~ 132.6mm Auto Focus Lens
  • Smart DNR™ 3D Digital Noise Reduction
  • Highlight Masking Exposure (HLC)
  • Pan 0-360° Endless
  • 360° Per Second Pan Speed
  • Vector Drive Technology (Pan/Tilt Motion in Shortest Path)
  • Auto Day/Night with IR Cut Filter
  • 128 Presets, 4 Patterns, 7 Schedules
  • 8 Alarm Sensor Input, 4 Relay Output
  • Digital Image Stabilizer (DIS)
  • Auto Gain Control (AGC)
  • Digital Slow Shutter (DSS)
  • Back Light Compensation (BLC)
  • Auto White Balance (AWB)
  • Programmable Privacy Zones
  • Fan Built-in

Image


 
 
Effective Pixels (H X V)
 
768 (H) X 494 (V)
Frequency
 
15.734KHz (H), 59.95Hz (V)
Horizontal TV Lines [Color/Black & White]
 
560 TV Lines [Color], 600 TV Lines [B/W]
Image Sensor
 
1/4" EX-View HAD PS CCD
Minimum Illumination
 
F1.6: 1.2 Lux [Color], 0.12 Lux [B/W]
S/N Ratio- Signal to Noise Ratio
 
52dB
Video Output
 
CVBS: 1.0Vp-p / 75 ?

Pan/ Tilt


 
 
Groups
 
8
Patterns
 
4
Presets
 
128, #95 Reserved for OSD
Range
 
Pan: 0-360? Endless Tilt: 180? (Auto Flip- ON), 90? (Auto- Flip- OFF)
Scans
 
8
Schedules
 
7
Speed
 
Preset: 360?/ Second Manual: 0.05 ~ 200?/ Second Scan: 1? ~ 180?/ Second

Lens


 
 
Focal Length
 
3.4 ~ 132.6mm
Lens Type
 
Auto Iris
Optical Zoom
 
39X

Mechanical


 
 
Dimensions
 
10.2 X 21.7 X 15.9 inches
Housing Material
 
Aluminum Die- Casting
Housing Type
 
Pan Tilt Zoom Dome
Sensor Input/ Output
 
8 Sensor Inputs/ 4 Relay Outputs
Warranty
 
2 Years Limited 2 Years Warranty for Junction Box 1 Year Warranty for PTZ Zoom Module
Weight
 
12.8 lbs

Operational


 
 
3D DNR
3D Digital Noise Reduction
OFF / LOW / MIDDLE / HIGH/ SMART
AGC
Auto Gain Control
AUTO / MANUAL / MAX GAIN LIMIT
AWB
Auto White Balance
ATW / AWC / MANUAL / INDOOR / OUTDOOR / OUT. AUTO
D/N
Day/ Night
AUTO / DAY / NIGHT
DSS- Digital Slow Shutter
 
x2 ~ x512 / 1/60 ~ 1/100000
HME
Highlight Masking Exposure
ON/OFF
Programmable Privacy Zones
 
12 Zones
SLC
Side Light Compensation
ON/OFF
WDR
Wide Dynamic Range
ON/OFF

Environmental


 
 
Operating Humidity
 
Less than 90% (Non-Condensing)
Operating Temperature
 
-29°C ~ 55°C (-20.2°F ~ 131°F)
Power Consumption
 
24 W, HEATER ON: 57 W 1.0 A, HEATER ON: 2.4 A
Storage Temperature
 
-29°C ~ 70°C (-4°F ~ 158°F)
Voltage
 
24VAC
STAR-LIGHT AHD
STAR-LIGHT MPA
VMAX A1
DWC-P1357WD
DWC-P1357WD
Title Type Size Download
Camera Accessories Compatibility Chart pdf 3.88 MB
DWC-PTZ39XFM Datasheet pdf 0.18 MB
DWC-PTZ39XFM Manual pdf 0.68 MB
Frequently asked questions
Q. How to control a PTZ camera using RS485 on DVR?
A.
  1. Connect RS-485 cables to the PTZ terminal on dvr
  2. Enter Setup menu
  3. Go to DEVICE then UTC/PTZ
  4. Enter Protocol, Baud rate and Address then SAVE
  5. Exit Menu to LIVE view
  6. Right click on the camera and select PTZ control
  7. User the controller to manipulate the camera
Q. My camera is blurry at night but clear in the day
A.
  1. Check the lens cover for dirt, debris, scratches, smudges or residue
  2. Tilt camera away from or remove nearby reflective objects
  3. Make sure rubber gasket is present and correctly seated on lens
  4. Clean lens cover with water and dry microfiber cloth
Q. My camera is stuck in Black & Whtie.
A.
  1. Make sure the camera is compatible with the dvr
  2. Make sure the camera is on the right signal
  3. Make sure the camera is getting sufficient light
  4. Make sure the light sensor is not obstructed.
  5. Move camera to a known working port. If problem follows the camera then the camera is the problem
  6. Enter the Camera's setup menu and make sure Day & Night is on Auto
  7. Factory default/Initialize the camera
  8. Bench test the camera with separate wiring and power
  9. Send in for repair if the problem persists.
Q. My PTZ camera is no longer touring
A.
  1. Check Preset and tour setup
  2. Re-run the function to start the tour
  3. Power cycle the camera and check for errors.
  4. Delete and recreate the presets and tour
Q. There are horizontal rolling bars on the monitor.
A.

This is a video ground loop due to more than one ground between camera and monitor/head-end

Ground Loop problems can be resolved by making sure that only one end of any video cable is
connected to a local ground. Make sure the video cable shields do not come into direct contact with
each other to prevent unintentional local grounding.

  1. Tape all connectors in such situations to minimize this risk.
  2. Keep camera runs as short as possible with all video cables cut to fit. Excess cable left along any run can increase the risk of interference.
  3. At the monitor end make sure all the CCTV equipment is connected to same power point to provide a common local ground.
  4. Implement a ground loop isolator

We'd Love to Hear from You

Please submit your information and a DW® representative will get in touch with you

  Call sales at (866) 446-3595

Help

Need help? Don't hesitate to ask us something. Email us directly sales@dwcc.tv or call us at (866) 446-3595. You can checkout our F.A.Q. and Help page to get more information about our products.

Scroll