IMPORTANT:

To Add a NAS (w/SAMBA) to on Spectrum Server 

• Make sure that the NAS you are attempting to connect to has samba installed and configured on the NAS device. 
  Note! Trashboxes/trash bins/recycling bins must be disabled as a part of the configuration step. Spectrum Server starts overwriting when the "Reserved Space" limit is reached. In order to do that it sends standard SMB-delete requests to the NAS drive. If recycle bin is enabled NAS will put files to the bin instead. The server won't get necessary space sending new delete commands instead -- eventually, it will end up with full drive and inability to record any data until the recycle bin is emptied.
• Right-click on the targeted Server in the Resource Panel and select Server Setting.
• Click Add External Storage.
• In the Add External Storage dialog input the path/URL to the Samba-shared directory. For example: \\NAS_DEVICE\smb_dir
• Input login credentials if needed.
• Press OK to apply changes.

To remove a SAMBA enabled NAS Device from Spectrum Server

• Right-click URL to NAS device in the list.
• Click Remove Storage
• Press OK to apply changes

1. Make sure the camera is compatible with the dvr
2. Make sure the camera is on the right signal
3. Make sure the camera is getting sufficient light
4. Make sure the light sensor is not obstructed.
5. Move camera to a known working port. If problem follows the camera then the camera is the problem
6. Enter the Camera's setup menu and make sure Day & Night is on Auto
7. Factory default/Initialize the camera
8. Bench test the camera with separate wiring and power
9. Send in for repair if the problem persists.