Contact Sales l Support l or Call us today at (866) 446-3595 Remote Technical Support
Partner Integrator Program
  • temp

Home Products 2.1 Megapixel AHD License Plate Recognition Indoor/Outdoor Bullet Camera

  • DOWNLOAD HIGH-RES PHOTO
Share this Product!
2.1 Megapixel AHD License Plate Recognition Indoor/Outdoor Bullet Camera
Model: DWC-LPR650AHD
Groundbreaking AHD Analog High Definition Cameras use existing coaxial cables to transmit crystal-clear detailed 1080p images. The AHD LPR camera delivers consistent, reliable plate capture in both day and night with a 6-50mm P-Iris lens and Smart IR™ up to 100 feet, capturing images from a range of 13 to 100 feet in moving vehicles up to 50mph. The LPR camera comes in a "No Fog or Condensation Under any Conditions" bullet housing to make sure license plates are captured clearly and visibly no matter the lighting challenge or weather condition.

Important Note: The camera requires a DVR that supports HD over Coax protocols, like the  VMAX A1.

PRODUCT SELECTOR
  • DWC-LPR650AHD

DISCONTINUED   

  • Analog High Definition (AHD) HD over Coax Technology
  • AHD LPR™ License Plate Recognition Technology captures reflective license plates up to 50mph from 13’ to 100’ Capture Range
  • Reliable Performance under Any Lighting Conditions
  • External OSD and Lens Adjustment
  • 1080P Resolution at 30fps
  • Varifocal P-Iris Lens 6~50mm
  • Smart IR™ with Intelligent Camera Sync, 100ft Range
  • Highlight Masking Exposure (HME)
  • Secondary Video-BNC Output
  • OSD Control via Coax Cable using UTC
  • Easy Icon Driven OSD Menu with Built-in Joystick
  • Programmable Privacy Zones
  • Auto Gain Control (AGC)
  • No Fog or Condensation Under any Weather Conditions
  • IP66 Certified (Weather Resistant)

Analog Cameras

 
 
13~100ft Capture Range*
 
 

Image

 
 
Frequency
 
60Hz/50Hz
Image Sensor
 
Panasonic 1/3" CMOS
Minimum Scene Illumination
 
F1.4 (30IRE): 0 Lux [B&W]
Resolution
 
1920x1080 (1080p)
S/N Ratio- Signal to Noise Ratio
 
55dB
Scanning System
 
Progressive scan
Synchronization
 
Internal
Active Pixels
 
1944(H) x 1092(V)
Video Output
 
AHD 1080p30fps/720p60fps/720p30fps
Alarm Output
1 Alarm Output
 Signal Technology
2.1 Megapixel AHD

Lens

 
 
Focal Length
 
6~50mm
Lens Type
 
P-Iris Vari-Focal
IR Distance100ft

Mechanical

 
 
Dimensions
 
9.76” x 3.81” Inch (248 x 96.7mm)
Housing Material
 
Aluminum
Housing Type
 
Bullet
Weight
 
1.83lbs

Operational

 
 
BLC
Backlight Compensation
OFF / AUTO
Gamma
 
0.45 ~ 0.75
Programmable Privacy Zones
 
24 Zones
Sharpness
 
0 ~ 10
Shutter Speed
 
1/30(25) - 1/30,000
Digital Noise Reduction
 
Off, Low, Middle, High
White BalanceAuto / Auto-Ex / Preset / Manual
Day and NightNight
Mirror/FlipYes
Auto Gain ControlMAx 60dB
Motion DetectionYes
Digital Zoomx1.0 ~ x16.0

Environmental

 
 
Operating Humidity
 
than 90% (Non-Condensing)
Operating Temperature
 
-20°C ~ 50°C (-4°F ~ 122°F)
Power Consumption
 
DC12V: 6.12W, 510mA, 
AC24V: 6W, 250mA
Power Requirements
 
DC12V/AC24V Dual Voltage
DWC-BLJUNC
Junction box for bullet cameras
Title Type Size Download
Camera Accessories Compatibility Chart pdf 3.88 MB
DWC-LPR650AHD Datasheet pdf 1.95 MB
DWC-LPR650AHD Datasheet (French) pdf 1.87 MB
DWC-LPR650AHD Datasheet (Portuguese) pdf 1.86 MB
DWC-LPR650AHD Datasheet (Spanish) pdf 0.17 MB
DWC-LPR650AHD Manual pdf 0.80 MB
Frequently asked questions
Q. How to setup LPR camera?
A. 1. If possible, park vehicle in area where plates will be captured
2. Zoom and focus in on the plate as much as possible 0
3. Try not to exceed 3 – 6 feet on either side of plate
4. Adjust shutter speed according to vehicle’s velocity
Q. My camera is blurry at night but clear in the day
A.
  1. Check the lens cover for dirt, debris, scratches, smudges or residue
  2. Tilt camera away from or remove nearby reflective objects
  3. Make sure rubber gasket is present and correctly seated on lens
  4. Clean lens cover with water and dry microfiber cloth
Q. My camera is no longer producing video.
A.
  1. Confirm the physical connection on the dvr
  2. Switch with a known working camera
  3. Check power to the camera
  4. Check camera compatibility
  5. Check user rights