Share this Product!
2.1 MP Indoor/Outdoor Universal HD over Coax® Dome Camera with IR
Model: DWC-V6263WTIR
Star-Light™ Universal HD over COAX® cameras deliver crystal-clear images and support real-time 30fps HD-Analog, HD-TVI, HD-CVI at 2.1MP and CVBS at 960H. The vandal dome cameras are IP66 rated and include CleanView™ dome treatment, that repels water, dust and grime. Star-Light™ Universal HD over Coax® cameras are engineered to work with our VMAX A1™ Universal HD over Coax® DVRs using your existing Coax infrastructure for a cost-effective, high resolution surveillance solution.
Universal HD Coax® Technology supports All
HD-Analog and All Analog to 960H
HD-Analog and All Analog to 960H
The Universal HD® Complete Solutions are the best way to upgrade an existing analog solution to high definition. Universal HD supports HD-Analog, HD-TVI, HD-CVI and CVBS analog signals to 960H.
CleanView™ Hydrophobic Dome Coating Repels Water, Dust and Grease
DW®'s new CleanView™ dome enclosures repel water and dust to maintain a camera's image quality. A technologically-advanced coating alleviates spotting and smudges that can affect the performance of the camera.
Click here to learn more about the CleanView™ process
Click here to learn more about the CleanView™ process
- Universal HD over Coax™ Technology with HD-Analog, HD-TVI, HD-CVI and all Analog to 960H Signal Support
- STAR-LIGHT™ Super Low Light Technology
- 2.1MP 1/3" Image Sensor at Real-time 30fps
- 2.8~12mm Varifocal P-Iris Lens
- True Wide Dynamic Range (WDR)
- OSD Control Via Coaxial (UTC)
- CleanView™ Hydrophobic Dome Coating Repels Water, Dust and Grease
- 100' Smart IR™ with Intelligent Camera Sync.
- Smart DNR™ 3D Digital Noise Reduction
- True Day/Night Mechanical IR Cut Filter
- De-Fog™ Extreme Weather Image Compensation
- Highlight Masking Exposure (HME)
- Easy Icon Driven OSD Menu with Built-in Joystick
- Programmable Privacy Zones
- Auto Gain Control (AGC)
- Backlight Compensation (BLC)
- Dynamic Range Compressor (DRC) Reveals Low Light Detail
- Auto White Balance (AWB)
- IP66 Certified Weather and Tamper Resistant
- IK-10 Impact Rated
- 5 Year Warranty
IMAGE |
||
Image sensor |
2.1MP/1080p 1/3" CMOS |
|
Active pixels |
1944 (H) x 1092 (V) |
|
Scanning system |
Progressive scan |
|
Frequency |
60Hz / 50Hz | |
Signal technology |
Universal HD over Coax® technology with HD-Analog, HD-TVI, HD-CVI and all analog to 960H signal support | |
Synchronization |
Internal | |
Resolution |
1920 x 1080 (1080p) | |
Minimum scene illumination |
0.3 lux (color) |
|
0 lux (B&W) |
||
S/N ratio |
55dB | |
Video output |
HD-Analog, HD-TVI, HD-CVI 2.1MP/1080p CVBS Analog up to 960H | |
I/O |
||
Alarm output |
1 alarm output | |
LENS |
||
Focal length |
2.8 ~ 12mm | |
Lens type |
Varifocal p-iris lens | |
Field of view (FoV) |
91 - 28° |
|
IR distance |
100ft range |
|
OPERATIONAL |
||
Shutter mode |
Auto, manual, FLC |
|
Shutter speed |
1/30-1/30,000 |
|
Backlight |
On, off |
|
Star-Light (sense-up) |
Off, x2 – x32 |
|
Wide dynamic range (WDR) |
True WDR, off, on |
|
Wide dynamic range (WDR) dB |
100dB |
|
Dynamic range compressor (DRC) |
Off, low, middle, high |
|
Smart DNR™ 3D digital noise reduction |
Off, low, middle, high |
|
White balance |
Auto / auto-ex / preset / manual |
|
Day / night |
Auto, day (color), night (B/W)
|
|
Mirror / flip |
Yes |
|
Auto gain control |
0~10 |
|
Motion detection |
Yes |
|
Privacy zones |
16 programmable privacy zones |
|
Sharpness |
0 ~ 10 |
|
Gamma |
0.45 ~ 0.75 |
|
De-fog |
On, off |
|
RS485 / UTP built-in |
Pelco D / Pelco C |
|
ENVIRONMENTAL |
||
Operating temperature |
-4°F ~ 122°F (-20°C ~ 50°C)
|
|
Operating humidity |
10–90% RH (non–condensing)
|
|
IP rating |
IP66 certified weather and tamper resistant
|
|
IK rating |
IK10-rated impact resistant
|
|
Other certifications |
FCC, CE, ROHS
|
|
ELECTRICAL |
||
Power requirement |
DC12V/AC24V dual voltage
|
|
Power consumption |
DC12V (LED OFF): 2.94W
DC12V (LED ON): 5.22W
|
|
AC24V (LED OFF): 2.5W
AC24V (LED ON): 4.35W
|
||
MECHANICAL |
||
Material |
Aluminum vandal housing, polycarbonate dome
|
|
Dimensions |
5.7" x 4.26" (145 x 108.3 mm)
|
|
Weight |
1.65lbs (0.75kg) |
|
Frequently asked questions
Q. How do I get communication from coax?
A.
- Camera must be connected to a Vmax A1 dvr or HD-TVI dvr to have coax communication
- Camera has 2 video cables make sure to use blue cable for TVI.AHD signal and coax communication
Q. How to turn on WDR?
A. At the VMAX A1 DVR
- Right click and select PTZ controller
- Press Menu to access the camera's OSD
- Go to Exposure, Brightness and select WDR.
- Go to Exit Jump
- Select Save & Exit
Q. My camera has a spotlight effect at night.
A.
Note: This is best adjusted at night
- Enter the Setup Menu
- Go to Day & Night
- Enable SMART IR and adjust the level
Note: This is best adjusted at night
Q. My Camera image is flashing/flickering
A.
- View the image to see if the environment has variable lighting
- If so, enable WDR or DRC in the camera’s menu
- If not, make sure power is sufficient and power cycle the camera
- Check cable and connectors
Wide Dynamic Range (WDR)
Wide Dynamic Range technology mechanically allows capturing an entire scene in challenging lighting conditions. One shutter is set to a short exposure, capturing the bright areas in the FoV, while the other is set for a long exposure, capturing the dark areas in the FoV. The camera then interlaces the images and combines them, capturing both areas with no loss of detail. This allows for an image capture even when there are very bright and dark areas in the camera’s field of view or images are distorted by a strong backlight.- Enter camera's setup menu
- Go to Exposure
- Go to Backlight and select WDR
- Enter WDR submenu to adjust the level
- Save & Exit
Dynamic Range Compressor (DRC)
DRC enables dark areas in images to become more visible without overexposing the bright areas to create one perfect image- Enter camera's setup menu
- Go to Exposure
- Select DRC
- Enter DRC submenu to adjust the level
- Save & Exit
Q. My camera is blurry at night but clear in the day
A.
- Check the lens cover for dirt, debris, scratches, smudges or residue
- Tilt camera away from or remove nearby reflective objects
- Make sure rubber gasket is present and correctly seated on lens
- Clean lens cover with water and dry microfiber cloth
Q. My camera is no longer producing video.
A.
- Confirm the physical connection on the dvr
- Switch with a known working camera
- Check power to the camera
- Check camera compatibility
- Check user rights
Q. My camera is stuck in Black & Whtie.
A.
- Make sure the camera is compatible with the dvr
- Make sure the camera is on the right signal
- Make sure the camera is getting sufficient light
- Make sure the light sensor is not obstructed.
- Move camera to a known working port. If problem follows the camera then the camera is the problem
- Enter the Camera's setup menu and make sure Day & Night is on Auto
- Factory default/Initialize the camera
- Bench test the camera with separate wiring and power
- Send in for repair if the problem persists.
Q. There are horizontal rolling bars on the monitor.
A.
This is a video ground loop due to more than one ground between camera and monitor/head-end
Ground Loop problems can be resolved by making sure that only one end of any video cable is
connected to a local ground. Make sure the video cable shields do not come into direct contact with
each other to prevent unintentional local grounding.
- Tape all connectors in such situations to minimize this risk.
- Keep camera runs as short as possible with all video cables cut to fit. Excess cable left along any run can increase the risk of interference.
- At the monitor end make sure all the CCTV equipment is connected to same power point to provide a common local ground.
- Implement a ground loop isolator