Complete Surveillance Solutions
Sales Portal
  • DOWNLOAD HIGH-RES PHOTO
Share this Product!
STAR-LIGHT MPA™ 1.3 Megapixel Analog Indoor/Outdoor Bullet Camera with IR
Model: DWC-B5661TIR

Find a Reseller Request a Demo ContactUs

The new STAR-LIGHT™ Megapixel Analog Cameras are a groundbreaking technology with highest analog resolution with a 1.3MP CMOS sensor capable of capturing up to 720P resolution, allowing the camera to receive and process images in high resolution, digitally zoom with no pixelatoin and display up to 820TV Lines resolution. The cameras also offer Intelligent Motion Detection and Automatic Digital Zoom and motion tracing, True Day & Night, 3D Digital Noise Reduction, De-Fog enhancement for extreme weather conditions, remote camera control via RS-485/ UTP and alarm output, the Star-Light MPA™ is an intelligent and high resolution solution for any application.

  • DWC-B5661TIR

DISCONTINUED   

TDN [True Day/Night] with IR Cut Filter
During daylight, the IR cut filter allows visible light to pass through, reflecting the unwanted infrared light. In low light environments, where artificial or external light is not available, the cut filter is removed from in front of the lens, allowing the camera to capture the infrared light that given out from the infrared LEDs, to capture as much light as possible to produce brighter images.

  • 1/3” Sony 1.3MP CMOS, 820TVL [B/W], 800TVL [Color]
  • QuickZoom™ Full Frame 8x Digital Zoom with no Loss in Resolution
  • STAR-LIGHT™ Super Low Light Technology
  • Wide Dynamic Range (WDR)
  • 2.8~12mm Varifocal Auto Iris Lens
  • Smart IR™ with Intelligent Camera Sync. 100ft Range
  • Smart DNR™ 3D Digital Noise Reduction
  • Highlight Masking Exposure (HME)
  • De-Fog™ (Extreme Weather Image Compensation)
  • Auto Sensing 24VAC/12VDC with Line Lock
  • Secondary Video-BNC Output (While UTP in use)
  • Easy Icon Driven OSD Menu with Built-in Joystick
  • True Day/Night Mechanical IR Cut Filter
  • Programmable Privacy Zones
  • Auto Gain Control (AGC)
  • Back Light Compensation (BLC)
  • Dynamic Range Compressor (DRC) Reveals Low Light Detail
  • Auto White Balance (AWB)
  • UTP Built-in
  • RS-485 Built-in
  • Motion Trigger Output (5V)
  • IP66 Certified (Weather Resistant) – Outdoor Domes and Bullets only

Image


 
 
Active Pixels (H X V)
 
1280 (H) x 1024 (V)
Frequency
 
15.734KHz (H), 59.95Hz (V)
Image Sensor
 
1/3" Sony 1.3MP CMOS Sensor
Minimum Illumination
 
F1.2 (30IRE): 0.0 Lux
Resolution
 
800TVL [Color], 820TVL [B/W]
S/N Ratio- Signal to Noise Ratio
 
55dB (AGC off)
Scanning System
 
2 : 1 Interlace
Synchronization
 
Internal or Line Lock
Total Pixels (H X V)
 
1280 (H) x 1024 (V)
Video Output
 
CVBS: 1.0Vp-p / 75 ?

Lens


 
 
Digital Zoom
 
x8
Focal Length
 
2.8~12mm
IR Distance
 
100ft Range IR
Lens Type
 
Varifocal Auto Iris

Mechanical


 
 
Dimensions
 
234.5 x 82.2 mm (9.23 X 3.23 in)
Housing Material
 
Aluminum
Housing Type
 
Bullet
Sensor Input/ Output
 
1 Alarm Output
UTP Built-in
 
Yes
Warranty
 
5 Years
Weight
 
1.7 lbs

Operational


 
 
3D DNR
3D Digital Noise Reduction
OFF / LOW / MIDDLE / HIGH
AGC
Auto Gain Control
0~20
AWB
Auto White Balance
ATW / AWB / PUSH / MANUAL
BLC
Backlight Compensation
OFF / ON
D/N
Day/ Night
AUTO/ DAY/ NIGHT
DPC- Dead Pixel Cancellation
 
OFF/ ON
Gamma
 
0.45 ~ 0.65
DRC
Dynamic Range Compressor
OFF / Low / Middle / High
HME
Highlight Masking Exposure
ON/OFF
Programmable Privacy Zones
 
OFF / ON (16 Programmable Zones)
Sharpness
 
0~10
Starlight™ (Super Low Light Technology)
 
X2-X64
WDR
Wide Dynamic Range
 

Environmental


 
 
Operating Humidity
 
Less than 90% (Non-Condensing)
Operating Temperature
 
-20°C ~ 60°C (-4°F ~ 140°F)
Power Consumption
 
DC12V: Max 3.96W, 330 mA (LED On) AC24V: Max 3.69W, 153 mA (LED On)
Voltage
 
Dual (12VDC & 24VAC)
STAR-LIGHT AHD
STAR-LIGHT PTZ
VMAX A1
Title Type Size Download
Camera Accessories Compatibility Chart pdf 3.88 MB
DWC-B5661TIR Datasheet pdf 0.32 MB
DWC-B5661TIR Manual pdf 0.61 MB
DWC-B5661TIR Presentation pptx 8.93 MB
DWC-B5661TIR Sell Sheet pdf 0.29 MB
STAR-LIGHT MPA Series Presentation pptx 8.93 MB
Frequently asked questions
Q. How to turn on WDR?
A. At the VMAX A1 DVR
  1. Right click and select PTZ controller
  2. Press Menu to access the camera's OSD
  3. Go to Exposure, Brightness and select WDR.
  4. Go to Exit Jump
  5. Select Save & Exit
Q. My camera has a spotlight effect at night.
A.
  1. Enter the Setup Menu
  2. Go to Day & Night
  3. Enable SMART IR and adjust the level
SMART IR adjusts the image for IR cameras to eliminate LED light reflection and white spots in the image. By breaking down the camera’s field of view into five zones, Smart IR allows for even distribution of the IR light. This prevents excessive illumination on images that are in the front of the scene and offers a clear image in B/W without any loss of detail.

Note:  This is best adjusted at night

Q. My camera is blurry at night but clear in the day
A.
  1. Check the lens cover for dirt, debris, scratches, smudges or residue
  2. Tilt camera away from or remove nearby reflective objects
  3. Make sure rubber gasket is present and correctly seated on lens
  4. Clean lens cover with water and dry microfiber cloth
Q. My camera is no longer producing video.
A.
  1. Confirm the physical connection on the dvr
  2. Switch with a known working camera
  3. Check power to the camera
  4. Check camera compatibility
  5. Check user rights

We'd Love to Hear from You

Please submit your information and a DW® representative will get in touch with you

  Call sales at (866) 446-3595

Help

Need help? Don't hesitate to ask us something. Email us directly sales@dwcc.tv or call us at (866) 446-3595. You can checkout our F.A.Q. and Help page to get more information about our products.

Scroll