Complete Surveillance Solutions
Sales Portal
  • DOWNLOAD HIGH-RES PHOTO
  • DOWNLOAD HIGH-RES PHOTO
Share this Product!
HD-SDI™ 2.1 Megapixel Snapit™ Indoor Dome Camera with IR
Model: DWC-HD421TIR

Find a Reseller Request a Demo ContactUs

The HD421TIR is a 2.1 megapixel indoor dome camera with HD-SDI 1080P output. The camera outputs the clearest high definition images with its 1/2.8” CMOS sensor and features like 3D Digital Noise Reduction and Wide Dynamic Range. The command via coaxial cables offers the unique ability to control and configure the camera remotely from DW®’s VMAXHD DVR. Our simple to install housing series combined with our reliable camera technology series gives you a high quality camera in just a few minutes.

DISCONTINUED   

TDN [True Day/Night] with IR Cut Filter
During daylight, the IR cut filter allows visible light to pass through, reflecting the unwanted infrared light. In low light environments, where artificial or external light is not available, the cut filter is removed from in front of the lens, allowing the camera to capture the infrared light that given out from the infrared LEDs, to capture as much light as possible to produce brighter images.

  • 3D DNR (Digital Noise Reduction)
  • BLC - Backlight Compensation
  • D/N - Day/ Night: True
  • Easy Icon Driven OSD Menu with Built-in Joystick
  • HME - Highlight Masking Exposure
  • IR Distance: 70ft Range Smart IR
  • Lens: 3.6~15mm Remote Auto Focus
  • Programmable Privacy Zones: 30 Programmable Zones
  • Resolution: Highest Resolution 2.1 Megapixels (HD-SDI)
  • Secondary Video - BNC Output
  • Star-Light™ (Super Low Light Technology)
  • WDR- Wide Dynamic Range

Image


 
 
Image Sensor
 
1/2.8" CMOS
Minimum Illumination
 
F1.2 (30IRE): 0.00 Lux
Resolution
 
2.1MP, 1080P (Color) 1080P (B/W)
S/N Ratio- Signal to Noise Ratio
 
50dB (AGC off)
Synchronization
 
Internal
Total Pixels (H X V)
 
2002 (H) x 1241 (V)
Video Output
 
HD-SDI

Lens


 
 
Focal Length
 
3.5-16mm
IR Distance
 
70ft Smart IR
Lens Type
 
Remote Auto Focus
Zoom
 
4.5x Optical Zoom

Mechanical


 
 
Dimensions
 
109 X 96.8 mm (4.25 X 3.81 in)
Housing Material
 
Plastic
Housing Type
 
Snapit Indoor Dome
Weight
 
0.529lbs

Operational


 
 
3D DNR
3D Digital Noise Reduction
OFF / LOW / MIDDLE / HIGH
AGC
Auto Gain Control
0-20
AWB
Auto White Balance
AUTO / AUTO_H / AUTO_l / PRESET / MANUAL / AUTO_EXT
BLC
Backlight Compensation
ON/OFF
Brightness
 
0~20
D/N
Day/ Night
Auto, Day (Color), Night (B/W)
DSS- Digital Slow Shutter
 
OFF / X2 / X3 / X4
HME
Highlight Masking Exposure
ON/OFF
Programmable Privacy Zones
 
30 Zones
Sharpness
 
0~20
Starlight™ (Super Low Light Technology)
 
ON/OFF
WDR
Wide Dynamic Range
ON/OFF

Environmental


 
 
Operating Humidity
 
Less than 90% (Non-Condensing)
Operating Temperature
 
-10°C ~ 55°C (14°F ~ 131°F)
Power Consumption
 
2.0W, 166.7mA / LED ON 3.5W, 291.7mA
Storage Temperature
 
-20°C ~ 70°C (-4°F ~ 158°F)
Voltage
 
12VDC
DWC-HV421TIR
HD-SDI™ 2.1 Megapixel Snapit™ Indoor/Outdoor Dome Camera with IR
Title Type Size Download
Camera Accessories Compatibility Chart pdf 3.88 MB
HD421TIR Manual.pdf pdf 2.51 MB
HD421TIR Specifications.pdf pdf 0.43 MB
Frequently asked questions
Q. How do I default the camera if I have a problem with image or signal?
A.
  1. Access camera menu from the dvr setup menu> enter preset 95> click set button>click device>click UTC/PTZ Tab.
  2. Go to Setup and select Initialize
  3. Press and hold the select button for five (5) seconds
Q. How do I get communication from coax?
A.
  1. Camera must be connected to a Vmax A1 dvr or HD-TVI dvr to have coax communication
  2. Camera has 2 video cables make sure to use blue cable for TVI.AHD signal and coax communication
Q. My camera has a spotlight effect at night.
A.
  1. Enter the Setup Menu
  2. Go to Day & Night
  3. Enable SMART IR and adjust the level
SMART IR adjusts the image for IR cameras to eliminate LED light reflection and white spots in the image. By breaking down the camera’s field of view into five zones, Smart IR allows for even distribution of the IR light. This prevents excessive illumination on images that are in the front of the scene and offers a clear image in B/W without any loss of detail.

Note:  This is best adjusted at night

Q. My camera is blurry at night but clear in the day
A.
  1. Check the lens cover for dirt, debris, scratches, smudges or residue
  2. Tilt camera away from or remove nearby reflective objects
  3. Make sure rubber gasket is present and correctly seated on lens
  4. Clean lens cover with water and dry microfiber cloth
Q. My camera is no longer producing video.
A.
  1. Confirm the physical connection on the dvr
  2. Switch with a known working camera
  3. Check power to the camera
  4. Check camera compatibility
  5. Check user rights
Q. My camera is stuck in Black & Whtie.
A.
  1. Make sure the camera is compatible with the dvr
  2. Make sure the camera is on the right signal
  3. Make sure the camera is getting sufficient light
  4. Make sure the light sensor is not obstructed.
  5. Move camera to a known working port. If problem follows the camera then the camera is the problem
  6. Enter the Camera's setup menu and make sure Day & Night is on Auto
  7. Factory default/Initialize the camera
  8. Bench test the camera with separate wiring and power
  9. Send in for repair if the problem persists.
Q. There are horizontal rolling bars on the monitor.
A.

This is a video ground loop due to more than one ground between camera and monitor/head-end

Ground Loop problems can be resolved by making sure that only one end of any video cable is
connected to a local ground. Make sure the video cable shields do not come into direct contact with
each other to prevent unintentional local grounding.

  1. Tape all connectors in such situations to minimize this risk.
  2. Keep camera runs as short as possible with all video cables cut to fit. Excess cable left along any run can increase the risk of interference.
  3. At the monitor end make sure all the CCTV equipment is connected to same power point to provide a common local ground.
  4. Implement a ground loop isolator

We'd Love to Hear from You

Please submit your information and a DW® representative will get in touch with you

  Call sales at (866) 446-3595

Help

Need help? Don't hesitate to ask us something. Email us directly sales@dwcc.tv or call us at (866) 446-3595. You can checkout our F.A.Q. and Help page to get more information about our products.

Scroll